To enable customers to proper and safe use of this product, customers operate according to the following requirements: 
 This equipment should be placed indoors, the electrical control box on the indoor safe area, installed in a dry, well ventilated place, should prevent rain, anti-collision. 
 2, the debugging of the equipment, power transmission site by our technical staff responsible for commissioning, customers do not debugging, power transmission, in order to avoid problems. 
 Threading pipe by the underground management must meet the requirements may not have an interface, threading pipe, welded joint, its walls should be smooth, so that the wire is easy through gasification between to the longest control room wiring ≤ 48 meters, electrical control box contactors and other electrical fastening wire and screws, should be a period of time by a professional electrician fastening. 
 4, independent of the grounding wire shall not be ground fault protection line with the zero line mix, but can not use the grounding line of protection when welding line, so as not to burn the explosion control system. 
 5, the main circuit 380V line control back to the line by, shall comply with the requirements of this equipment, and requires a rubber sheath. The pressure should be sent to a separate dual-core with rubber sheathed shield wire. 
 6, the pressure of the instrument warm-up 30 minutes before normal use. 
 7, temperature indicator, pressure indicator sensor instrumentation systems do not vibrate, to avoid problems. 
 8, the liquid inlet (pressure sensor and solenoid valve) shall be deemed the moment of force. 
 9, our technical staff responsible for technical training in the field. 
 Protection device 10, the equipment and electrical control box must be grounded, and the resistance less than 4 ohms ≥ M12 ground bolt. 
 11, outage repair, maintenance hand, prohibit the anhydrous dry container. 
 Notes outside of the unknown, the customers letter calls for inquiry 
 Vaporizer daily care and maintenance of: 

 A regular inspection vaporizer water level is normal (usually above 2/3), attention to the timely replenishment. 
 Second, the vaporizer must adhere to regular sewage. Generally 2-3 days of sewage once, temperament, poor or a large amount once a day, the sewage should be in the high pressure, the residue should be discharged to the outside. 
 Three, six months after gasification inlet filter ventilation should be cleaned once, and then every other year, remove the cleaning time. 
 Fourth, check the pressure gauge reading is normal, the pressure gauge every other year should check. 
 Five, vaporizer every six months, changing the water once, re-changing the water to be added to potassium dichromate, the conditional increase in demineralized water or purified water effects better. 
 Every three months in the case of the power is turned off by an electrician check the main power terminal block is loose. Necessary, re-tighten. 
 , The local power supply voltage fluctuations (380V ± 10%), the proposed installation of a 220V power supply regulator, to ensure the normal working of the electrical components and instrumentation. 
 8 a day, gasification and other gas equipment, pipelines do regular checks to ensure no leak phenomenon.